STB8840 Series Precision LCR Meter

CurrentHome>LCR Meters

STB8840 Series Precision LCR Meter

Overview Specifications Ordering Resources

STB8840 series precision LCR meter innovatively adopts a new generation of technologies such as dual CPU architecture, Linux bottom layer, 10.1-inch capacitive touch screen, built-in instruction which effectively solves the defects of slow LCR test, single display and complicated operation in the past.
The measurement frequency of SH2840 series is from 20Hz-500kHz/2MHz, which makes up for the shortcoming of lack of high-performance bridge in the frequency range of 500kHz.
STB8840 series LCR meter adopts four-parameter display, all settings, monitoring, sorting parameters, status, etc. can be displayed on the same screen, avoiding the cumbersome operation of frequent switching.

Applications: Passive component / Semiconductor component / Dielectric material / Magnetic material / Semiconductor material / Liquid crystal cell

** Standard Lead Time: within 4 weeks **

Key Features

Test frequency: 20Hz-500kHz / 2MHz

High stability and consistency: 14 range configurations

High speed: dual CPU architecture, measurement speed up to 1000 times/s

Three test methods: point test, list scan, and graph scan

Four-parameter measurement

201 point multi-parameter list scanning function

Graphic scanning function, 4 trajectories can be selected arbitrarily, support 1/2/4 split screen

Sorting function: 10 levels of sorting in LCR mode

10.1 inch capacitive touch screen, high resolution 1280*800

Support SCPI/MODBUS instruction set, compatible with KEYSIGHT E4980A, E4980AL, HP4284A

Frequency Range	STB8840A: 20Hz – 500kHz STB8840B: 20Hz – 2MHz
Basic Accuracy	0.05%
AC Signal Source	Voltage: 5mVrms – 20Vrms Current: 50μArms – 100mArms
DC Bias	Voltage: 0V – ±40V Current: 0mA – ±100mA Bias current source: 0mA – 100mA
DCR Test	Voltage: 100mV – 20V Current: 0mA – 100mA
	(Note: see more technical specifications in the ‘Resource’ – ‘Datasheet’)

Main Machine

Module No.	Item	Description
STB8840A	Precision LCR Meter	Frequency range: 20Hz to 500kHz, including short circuit, fixture and Kelvin test lead with box four-terminal insulation & lock
STB8840B	Precision LCR Meter	Frequency range: 20Hz to 2MHz, including short circuit, fixture and Kelvin test lead with box four-terminal insulation & lock

Options

Module No.	Item	Description
SBF0007A	Magnetic Ring Test Fixture	DC-120MHz, maximum ±42V DC bias, applied to single-turn inductance test of small magnetic ring, customizable size
SBF0008A	SMD Component Test Fixture	DC-120MHz, maximum ±42V DC bias, applied to SMD components, especially high-frequency small capacitor ≤3pF or small inductance ≤1uH, test frequency ≥100kHz
SBF0009B	SMD Component Test Fixture	DC-15MHz, maximum ±42V DC bias, applied to SMD components
SBF1108C	Four-terminal SMD Test Fixture	DC-40MHz, maximum ±42V DC bias, applied to SMD components, especially high-frequency small capacitor ≤3pF or small inductance ≤1uH, test frequency ≥100kHz
SBF0047	Four-terminal Test Fixture	DC-120MHz, maximum ±42V DC bias, applied to impedance testing of wire-like devices, with shielded ground terminal
SBF0048	Four-terminal Test Fixture	DC-13MHz, maximum ±42V DC bias, applied to in-Line axial and radial impedance components
SBF0063	Four-terminal Test Fixture	DC-100kHz, maximum ±42V DC bias, applied to test bolted capacitor and DC_LINK capacitors
SBF0062A	Four-terminal Test Fixture	DC-100kHz, maximum ±42V DC bias, applied to test thin film bulk DC_LINK capacitors for electric vehicles
SBF0077	Dielectric Test Fixture	DC-120MHz, DUT size: 10mm-56mm, DUT thickness: ≤10mm, applied to dielectric analysis of solid materials

Document

STB8840 Series Precision LCR Meter Datasheet