SFS-2000 series is the new standard 4 motors fusion splicer. Light Weight, Touch Screen, Friendly UI, Fast Fusion and Heating, makes it very popular and hot.
SFS-2000 Fusion Splicer (4 motors)
Key Features
7s fast splicing, 14s highly efficient heating
320/88 times image magnification, 5mm fusing for ultra-short cleave length
10000 groups of fusion records storage
300 groups of splice modes, 100 groups of heating modes
220 counts of splicing and heating cycles with build-in 6800mAh Li-on battery
Ceramic presser foot, ceramic V-groove, all-in-one fixture
Dual-directional fusing, auto fusing, intelligent heat shrink
USB and SD card interface, auto update of U disk
GUI (graphical user interface) and touch screen, convenient for operation
Dust-resistant, water-resistant, shock-resistant, greater environment adaptability
| Motor Qty. | 4 |
| Alignment Method | Cladding alignment, manual alignment |
| Applicable Fibers | SMF (G.652), BIF (G.657), MMF (G.651), DSF (G.653), NZDSF (G.655) |
| Typical Splice Loss | 0.03dB (SMF/BIF), 0.02dB (MMF), 0.04dB (DSF), 0.04dB (NZDSF) |
| Cleave Length | • 5 – 16mm (coated optical fiber diameter ≤250μm) • 10mm (coated optical fiber diameter: 250μm – 3mm) |
| Optical Fiber Diameter | Cladding: 80 – 150μm, coating layer: 0.1 – 3mm |
| Return Loss | Better than 60dB |
| Attenuation Value Accuracy | 0.01dB |
| Splicing/ Heating Programe | 300 / 100 |
| Typical Splicing Time | 7s (fast mode) |
| Typical Heating Time | 14s (40mm, 23℃) |
| Estimated Splice Loss | Yes |
| Tension Test | 1.96N – 2.25N |
| Applicable Protection Sleeve | 60mm, 40mm and a series of protection sleeves |
| No. of Splice/heating Per Battery Full Charge | > 220 times |
| Magnification Time | 320 times / 88 times |
| Fusion Record | 10000 groups |
| Electrode Service Life | Typical: 4000 splices, can be replaced by customers |
| Construction Lighting | Built-in lights with high-brightness and wide lighting area |
| Operating Condition | • Altitude: 0 to 6000m above sea level • Temperature: -10 to 50°C • Humidity: 0 to 95%RH, non-dew • Wind: 15m/sec |
| Resistance Features | • Shock: 60cm all surface drop • Dust: Exposure to dust (0.1 to 500 μm dia Alumina Silicate), IP5X • Rain: H=3mm/min for 10min, IPX2 |
| Port | USB / SD card |
| Display | High performance 4.3 inch LCD screen touch |
| Power Supply | AC: 100-240V, 60Hz, 0-1.5A; DC: 10-15V |
| Power Consumption | < 55W |
| Battery Service Llife | Cycle charging: 300 – 500 counts, can be replaced by customers |
| Dimension | 120 (W) × 130 (H) × 154 (D) mm |
| Weight | 1.65kg (excluding battery), 1.95kg (including battery) |
Main Machine
| Module No. | Item | Description |
| SFS-2000 | Fusion Splicer | 4 motors |
Standard Package
| No. | Item | Qty. |
| 1 | Main host | 1 PC |
| 2 | Fiber cleaver | 1 PC |
| 3 | Power adapter | 1 PC |
| 4 | Power cord | 1 PC |
| 5 | Fiber stripper | 1 PC |
| 6 | Cable stripper | 1 PC |
| 7 | Spare electrode | 1 PAIR |
| 8 | Cooling tray | 1 PC |
| 9 | Cleanup tools | 1 SET |
| 10 | Carrying case | 1 PC |
| 11 | Certificate of quality | 1 PC |
| 12 | User manual | 1 PC |
Document
Video
-
Unboxing Video
-
Operation Video
