CSA-M Series Signal Analyzer

Saluki CSA-M series benchtop signal analyzer reaches the frequency from 100 kHz to up to 26.5 GHz with a maximum of 40 MHz analysis bandwidth. It can test signal power, frequency, phase, P-1, TOI, OBW, channel power, spurious, ACPR, CCDF, SEM, EVM, and other indicators.

CSA-M series signal analyzer is a cost-effective tool for essential signal characterization.  Its capabilities provide a solid foundation for testing in general-purpose and educational applications.

Key Features

Frequency range from 100kHz to 26.5GHz

Low DANL level to -164dBm @ 1GHz (preamp on)

1Hz minimum resolution bandwidth (RBW)

Fast continuous scanning technology

13.3 inch LCD touch screen, easy and convenient user operation

  • Your Reliable RF&MW Test Equipments

    •   Convenient and Easy:  high-resolution LCD touch screen

    •   Quick Combination:  miniature chassis + integrated software

    •   High Performance:  benchmarking Keysight performance

    •   Stable and Reliable:  rigorous test + statistical analysis

    •   Customer Value:  cost-effective + high efficiency

    •   R&D Technology:  calibration test + LO technology + signal processing + channel technology

Frequency Range

•   CSA2026-M: 100 kHz to 26.5 GHz

Frequency Readout Accracy

± (marker frequency × frequency reference accuracy + 0.25 % × span + 5 % × RBW + 2Hz + 0.5 × horizontal resolution)

Aging Rate

± 3×10-7/ year

Frequency Span Range

0Hz (zero span),  10Hz to maximum frequency of instrument

Scan Time

•   1μs to 6000s (span = 0Hz)

•   1ms to 4000s (span ≥ 10Hz)

Scan Accuracy

± 1% nominal (zero span)

Trigger Mode

Free run, video, external, RF burst, periodic timer

Scan (Trace) Point Range

1 to 40001 (all spans)

Resolution Bandwidth

1Hz to 3MHz (10% steps), 4, 5, 6, 8 MHz

Video Bandwidth

1Hz to 3MHz (10% steps), 4, 5, 6, 8 MHz, and wide open (labeled 50MHz)

Amplitude Test Range

DANL to +27dBm (preamp off)

Max. Safe Input Level

Average total power:

•  +27dBm (0.5W), (≥ 10dB input attenuation , preamp off)

•  +27dBm (0.5W), (≥ 20dB input attenuation , preamp on)

Peak pulse power:

•  +47dBm (50W), (< 10μs pulse width, < 1% duty cycle, ≥ 30dB input attenuation)

Display Scale Switching Uncertainty

0dB

Trace Detectors

Normal, peak, sample, negative peak, log power average, RMS average, and voltage average

SSB Phase Noise (CF=1GHz, Typ.)

•  -80 dBc/Hz @ 100Hz offset

•  -102 dBc/Hz @ 1kHz offset

•  -108 dBc/Hz @ 10kHz offset

•  -110 dBc/Hz @ 100kHz offset

•  -132 dBc/Hz @ 1MHz offset

Displayed Average Noise Level (Preamplifier On)

•  1MHz – 10MHz: -154, (-158) dBm
•  10MHz – 1.5GHz: -160, (-163) dBm
•  1.5GHz – 4.5GHz: -160, (-163) dBm
•  4.5GHz – 7GHz: -157, (-161) dBm
•  7GHz – 9.5GHz: -158, (-160) dBm
•  9.5GHz – 13GHz: -156, (-160) dBm
•  13GHz – 14.5GHz: -158, (-161) dBm
•  14.5GHz – 19.3GHz: -153, (-157) dBm
•  19.3GHz – 23GHz: -152, (-157) dBm
•  23GHz – 24GHz: -150, (-155) dBm
•  24GHz – 26.5GHz: -144, (-149) dBm

Displayed Average Noise Level (Preamplifier Off)

•  100kHz – 1MHz: (-125) dBm
•  1MHz – 10MHz: -144, (-148) dBm
•  10MHz – 1.5GHz: -148, (-150) dBm
•  1.5GHz – 4.5GHz: -146, (-149) dBm
•  4.5GHz – 7GHz: -141, (-145) dBm
•  7GHz – 9.5GHz: -144, (-147) dBm
•  9.5GHz – 13GHz: -136, (-140) dBm
•  13GHz – 14.5GHz: -142, (-145) dBm
•  14.5GHz – 19.3GHz: -132, (-138) dBm
•  19.3GHz – 23GHz: -134, (-139) dBm
•  23GHz – 24GHz: -132, (-137) dBm
•  24GHz – 26.5GHz: -128, (-133) dBm

Residual Response (Input terminated, 0dB attenuation)

•  200kHz – 26.5GHz(swept):  -90dBm

•  Zero span or FFT or other frequencies:  -100dBm norminal

Second Harmonic Distortion (SHI)

•  10MHz – 3.75GHz:  +50dBm

•  3.75GHz – 13.25GHz:  +62dBm

Third-order Intermodulation Distortion (TOI)

Preamp Off:

•  10MHz – 2GHz: +12,(+16) dBm

•  2GHz – 3GHz: +12,(+17) dBm

•  3GHz – 7.5GHz: +12,(+16) dBm

•  7.5GHz – 13.6GHz: +11,(+15) dBm

•  13.6GHz – 26.5GHz: +10,(+14) dBm

Preamp On:

•  10MHz – 26.5GHz: -8dBm nominal

I/Q Analyzer

Frequency range:

•  Standard: 100kHz – 25MHz

•  Option B40: 100kHz – 40MHz

Resolution bandwidth:

Overall: 100mHz – 3MHz

Analysis bandwidth:

•  Standard: 100kHz – 25MHz

•  Option B40: 100kHz – 40MHz

Data acquisition:

•  IQ analyzer: 4,000,000 IQ sample pairs

•  Sample rate: 90MSa/s

•  ADC resplution: 14 Bits

Connectors

RF input: 2.92mm (female), 50Ω nominal

10MHz in: SMA (female), 50Ω nominal

10MHz out: SMA (female), 50Ω nominal

Trigger in: SMA (female), 10kΩ nominal

Trigger out: SMA (female), 50Ω nominal

Analog out: SMA (female), 50Ω nominal

Display

13.3 inch LCD touch screen

Dimension

440 (W) × 285 (H) × 225 (D) mm

Weight

9kg

(Note: see more detail information in the ‘Resource’ – ‘Datasheet’)

Main Machine

Module No. Item Description
CSA2026-M Signal Analyzer 100 kHz to 26.5 GHz, 25MHz analysis bandwidth (software can be upgraded remotely)

Options

Module No. Item Description
P26 Pre-amplifier /
B40 40MHz Analysis Bandwidth To output real-time signal acquisition data through optical fiber and support signal data output with maximum 40MHz bandwidth.
HAS High Resolution Step Attenuator 0-50dB,2dB step
PFR Precision Frequency Reference /
RTA Real Time Analysis /

Leave A Message

    Saluki Technology