SGM150/SGM200 Signal Generator Module

CurrentHome>Signal Generators

SGM150/SGM200 Signal Generator Module

Overview Specifications Ordering Resources

The microwave signal generator module has the characteristics of ultra wideband, excellent performance, and easy integration. The module has various practical functions such as continuous wave signal, analog modulation, pulse modulation, amplitude frequency scanning, and low-frequency function waveform output, and has a very high cost-effectiveness, The module height is standard 1U, suitable for system integration and desktop testing and measurement equipment use. The complete standard SCPI command set and universal USB and LAN interfaces provide great convenience for remote control and secondary development.

Features

Frequency range up to 20GHz

Support 130dB wide dynamic power adjustmene output

Pure Continuous Wave output,typical phase noise ≤-115dBc/Hz@10KHz

Sweep modes: frequency sweep, amplitude sweep, and frequency+amplitude sweep

Standard analog modulation: AM/FM/ΦM

Pulse modulation with an on-off ratio of up to 70dB

Low-frequency output: sine waves,square waves, triangular waves

LAN remote control interface, offering a standard SCPI command set

Low power consumption, lightweight design, and compact size suitable for system integration

Step Sweep Signal
The signal generator is capable of generating sweep signals with equal steps,including three sweep modes: frequency sweep amplitude sweep, and frequency+amplitude sweep.

Sweep type: Step sweep, List sweep
Pure Continuous Wave
Outputting signals at various frequencies and amplitudes

Output dynamic range of up to 130 dBm.
Low Frequency Output
Low-frequency output: sine waves, square waves, triangular waves.
Pulse Modulation
Pulse modulation with minimum pulse width of 200ns,
supporting Internal/External pulse modulation input,
External trigger input.

Frequency Range	100 kHz to 15 GHz 9 kHz to 20 GHz
Frequency Resolution	0.01 Hz
Reference Frequency	10 MHz
Temperature Stability	±1.0ppm(Option：±100 ppb)
Internal Reference Output	10 MHz, ≥+8 dBm (typ.)
Sweep Mode	Frequency, Amplitude, Fequency+Amplitude
Trigger mode	Auto, External trigger
LF Output wave form	Sine wave: 1Hz to 500kHz Triangle wave: 1Hz to 100kHz Square wave: 1Hz to 20kHz
Modulation	Analog modulation (AM/FM/ΦM)
AM	Modulation depth: 0% to 90% Modulation frequency response: 10Hz to 20kHz
FM	Maximum deviation: N ×64MHz（Nominal value） N: represents the factor that helps define the indicator, with a Maximun value of 1 and a Minimun of 1/128. Modulation frequency response: 10Hz to 200kHz
ФM	Maximum phase deviation: N×6rad（Nominal value） Modulation frequency response: 10Hz to 200kHz
RF output	2.92mm, 50Ω
LF output	SMA, 50 Ω
Power Supply	Typical+12V±5%, Maximum current 2.0A(DC)
Dimensions(L×W×H)	255mm×235mm×44mm
Weight	＜3kg
	(Note: see more detail information in the ‘Resource’ – ‘Datasheet’)