SPS Series Phase Adjustable Microwave Analog Signal Generator

Overview Specifications Ordering Resources

SPS series phase-adjustable microwave analog signal source is a multi-channel output phase-adjustable microwave signal source. The product frequency covers from 10MHz to 12, 24, 40, 45 and 67GHz, with frequency steps of 0.01H and narrow pulse modulation. Function, it can realize multi-channel coherent signal output. The frequency and power of each channel are independently adjustable and can also be adjusted in a linkage manner to support adjustable phase and dual-tone signal output. The SPS series phase-adjustable microwave analog signal sources have excellent performance in applications requiring excellent phase noise, large dynamic output power range, multi-channel simultaneous testing and portability. At the same time, all control commands can be set through the local panel or through the network Remote control is a very cost-effective microwave analog signal source.

Application: Low phase noise signal source for research and development/local oscillator replacement/component testing/receiving sensitivity test.

Key Features

Balance product performance and purchase budget Maximum output power: >+20dBm (typ. @10GHz)

Phase adjustable range: 360°

Phase adjustable step: 0.1°

Phase noise <-107dBc/Hz (10GHz, 1kHz offset)

Multi-channel coherent output

With narrow pulse modulation function, minimum pulse width 50ns

Highly integrated and compact

Model	SPS12D SPS24D SPS40D SPS45D SPS67D
1. Frequency Range
Number of channels	2
Frequency range	10 MHz to 12 GHz 10 MHz to 24 GHz 10 MHz to 40 GHz 10 MHz to 45 GHz 10 MHz to 67 GHz
Output frequency step	0.01 Hz
Isolation between channels	≥80dB
2. Frequency Reference
Internal time base reference oscillator aging rate	After 30 days <±1ppm/year (nominal value)
Initial calibration accuracy	±0.01ppm (nominal value)
Temperature effect	＜±0.05ppm, -20 to +70ºC (nominal value)
3. Internal Reference Output
Frequency	10MHz
Power	≥5dBm
Internal reference frequency stability	±5e-8 0℃～+50℃
Frequency accuracy	≤0.1ppm
4. External Reference Input
Input frequency	10MHz
Lock range	±1ppm
Power	5 to 10dBm
Impedance	50Ω
Waveform	Sine wave or square wave
	Internal and external references can be switched.
5. Scan Characteristics
Operating mode	Step sweep (frequency steps at the same interval), list sweep, power sweep.
Scan range	Within the frequency range of the equipment.
Dwell time	20ms to 10s
Time resolution	100us
Frequency switching speed	≤20ms

Main machine

Module No.	Item	Description
SPS12D	Phase Adjustable Analog Signal Generator	10 MHz to 12 GHz
SPS24D	Phase Adjustable Analog Signal Generator	10 MHz to 24 GHz
SPS40D	Phase Adjustable Analog Signal Generator	10 MHz to 40 GHz
SPS45D	Phase Adjustable Analog Signal Generator	10 MHz to 45 GHz
SPS67D	Phase Adjustable Analog Signal Generator	10 MHz to 67 GHz