SG30XX Series Phase Adjustable Microwave Analog Signal Generator

SG30XX series phase-adjustable microwave analog signal source is a multi-channel output phase-adjustable microwave signal source. The product frequency covers from 10MHz to 12, 24, 40, 45 and 67GHz, with frequency steps of 0.01H and narrow pulse modulation. Function, it can realize multi-channel coherent signal output. The frequency and power of each channel are independently adjustable and can also be adjusted in a linkage manner to support adjustable phase and dual-tone signal output. The SG30XX series phase-adjustable microwave analog signal sources have excellent performance in applications requiring excellent phase noise, large dynamic output power range, multi-channel simultaneous testing and portability. At the same time, all control commands can be set through the local panel or through the network Remote control is a very cost-effective microwave analog signal source.

Application: Low phase noise signal source for research and development/local oscillator replacement/component testing/receiving sensitivity test.

Key Features

Balance product performance and purchase budget Maximum output power: >+20dBm (typ. @10GHz)

Phase adjustable range: 360°

Phase adjustable step: 0.1°

Phase noise <-107dBc/Hz (10GHz, 1kHz offset)

Multi-channel coherent output

With narrow pulse modulation function, minimum pulse width 50ns

Highly integrated and compact

Model

SG3012D

SG3024D

SG3040D

SG3045D

SG3067D

1. Frequency Range
Number of channels

2

Frequency range

10 MHz to 12 GHz

10 MHz to 24 GHz

10 MHz to 40 GHz

10 MHz to 45 GHz

10 MHz to 67 GHz

Output frequency step

0.01 Hz

Isolation between channels

≥80dB

2. Frequency Reference
Internal time base reference oscillator aging rate

After 30 days <±1ppm/year (nominal value)

Initial calibration accuracy

±0.01ppm (nominal value)

Temperature effect

<±0.05ppm, -20 to +70ºC (nominal value)

3. Internal Reference Output
Frequency

10MHz

Power

≥5dBm

Internal reference frequency stability

±5e-8  0℃~+50℃

Frequency accuracy

≤0.1ppm

4. External Reference Input
Input frequency

10MHz

Lock range

±1ppm

Power

5 to 10dBm

Impedance

50Ω

Waveform

Sine wave or square wave

Internal and external references can be switched.

5. Scan Characteristics
Operating mode

Step sweep (frequency steps at the same interval), list sweep, power sweep.

Scan range

Within the frequency range of the equipment.

Dwell time

20ms to 10s

Time resolution

100us

Frequency switching speed

≤20ms

Main machine

Module No. Item Description
SG3012D Phase Adjustable Analog Signal Generator 10 MHz to 12 GHz
SG3024D Phase Adjustable Analog Signal Generator 10 MHz to 24 GHz
SG3040D Phase Adjustable Analog Signal Generator 10 MHz to 40 GHz
SG3045D Phase Adjustable Analog Signal Generator 10 MHz to 45 GHz
SG3067D Phase Adjustable Analog Signal Generator 10 MHz to 67 GHz

Leave A Message

    Saluki Technology