1435A-V: 9kHz to 3GHz

1435B-V: 9kHz to 6GHz

0.001Hz

≤1ms (typical value)

Standard:

±5×10^-7/year (after continuous switch-on for 30 days)

High stability time base option H10:

•  ±5×10^-8/year (after continuous switch-on for 30 days),

•  ±5×10^-10/day(after continuous switch-on for 30 days)

•  Frequency: 10MHz

•  Power: >+4dBm, to 50Ω load

•  Frequency: 1MHz – 50MHz, step 1Hz

•  Power: 0dBm to +7dBm, impedance 50Ω

Step scan, List scan

100μs to 100s

•  Standard: -15dBm (can be set -20dBm)

•  Option H01: -110dBm (can be set -135dBm)

Standard:

•  9kHz ≤ f ≤ 3GHz: 18dBm

•  3GHz < f≤ 5GHz: 16dBm

•  5GHz < f≤ 6GHz: 15dBm

High power output option H08:

•  9kHz ≤ f ≤ 3GHz: 22dBm

•  3GHz < f≤ 5GHz: 20dBm

•  5GHz < f≤ 6GHz: 18dBm

Standard：

H01 programmable step attenuator option：

0.01 dB

50Ω (rated value)

9kHz ≤ f ≤ 3GHz: <1.7

3GHz < f ≤ 13GHz: <1.6

0.5W (0V DC) (rated value)

•  9kHz ≤ f ≤ 10MHz: < -23dBc

•  10MHz < f ≤ 2GHz: < -30dBc

•  2GHz < f ≤ 3GHz (1435A-V): < -55dBc

•  2GHz < f ≤ 6GHz (1435B-V): < -30dBc

•  9kHz ≤ f ≤ 6GHz: None

Standard：

•  9kHz ≤ f ≤ 250MHz: < -54dBc

•  250MHz < f ≤ 3GHz: < -62dBc

•  3GHz < f ≤ 6GHz: < -56dBc

Low phase noise option：

•  9kHz ≤ f ≤ 250MHz: < -60dBc

•  250MHz < f ≤ 3GHz: < -77dBc

•  3GHz < f ≤ 6GHz: < -71dBc

Standard:

Low Phase Noise Option H06:

•  Maximum frequency offset: N × 16MHz (N is the number of fundamental harmonic wave)

•  Accuracy (1kHz modulation rate, frequency offset: N × 500kHz): ± (2% × set frequency offset + 20Hz)

•  Modulation rate (3dB bandwidth, frequency offset: N × 500kHz): DC – 7MHz

•  Distortion (1kHz rate, frequency offset: N × 500kHz): <0.4%

•  Maximum phase offset: N × 16rad (N is the number of fundamental harmonic wave)

•  Accuracy (1kHz modulation rate, frequency offset: N × 500kHz): ± (2% × set phase offset + 0.01rad)

•  Modulation rate (3dB bandwidth, phase offset: N × 8rad): DC – 1MHz

•  Distortion (1kHz modulation rate, phase offset: N × 8rad): <0.4%

•  Maximum depth: >90%

•  Amplitude modulation accuracy: (1kHz modulation rate, 30% modulation depth): ±(4% × set depth +1%)

•  Amplitude modulation distortion: (1kHz modulation rate, linear mode, total harmonic distortion, 30% modulation depth): <2%

•  Amplitude modulation bandwidth (3dB bandwidth, 30% modulation depth, frequency test point: 1GHz, 5GHz): DC-100kHz

•  Switching ratio: >80dB

•  Rise and fall time: <10ns

•  Minimum pulse of internal fixed amplitude: 1μs

•  Minimum pulse of non-fixed amplitude: 100ns

•  Switching ratio: >80dB

•  Rise and fall time: <10ns

•  Minimum pulse of internal fixed amplitude: 1μs

•  Minimum pulse of non-fixed amplitude: 20ns

It provides three independent signals for frequency/phase modulation, amplitude modulation and low frequency output signals

•  Waveform:   sine wave, square wave, triangle wave, sawtooth wave

•  Frequency range: sine wave 0.1Hz – 10MHz, square wave, triangle wave, sawtooth wave 0.1Hz – 1MHz

•  Frequency resolution: 0.1Hz

•  Low  frequency output: amplitude 0-5V peak (rated value), to 50Ω load

•  Pulse width: 20ns – (42s-10ns) (rated value)

•  Pulse period: 40ns – 42s (rated value)

•  Resolution: 10ns

The Multi-function generator consists of 7 waveform generators. The generator can be set separately or five generators can be set simultaneously by using the AM, FM/ΦM and the composite modulation features in the low-frequency output.

Waveform:

Function generator 1: sine wave, triangle wave, square wave, sawtooth wave, pulse

Function generator 2: sine wave, triangle wave, square wave, sawtooth wave, pulse

Dual function generator: sine wave, triangle wave, square wave, sawtooth wave, pulse, phase offset and amplitude ratio of audio 2 relative to audio 1;

Scan function generator: sine wave, triangle wave, square wave, sawtooth wave;

Noise generator 1: uniform, Gaussian;

Noise generator 2: uniform, Gaussian;

DC: LF output only;

Frequency parameters:

Sine wave: 0.1Hz to 10MHz;

Triangle wave, square wave, sawtooth wave, pulse: 0.1Hz to 1MHz;

Resolution: 0.1Hz

50MHz-3GHz: EVM (RMS%) <1.4%

3GHz-6GHz(Standard): EVM (RMS%) <1.8%

3GHz-6GHz(Low phase noise option): EVM (RMS%) <1.4%

(Carrier 900MHz, 1.8GHz, 2.4GHz, 6GHz)

Standard:

120MHz (multi-tone, number of tones: 51, frequency interval: 2.4MHz, ±3dB bandwidth);

H09 large modulation bandwidth option:

200MHz (multi-tone, number of tones: 51, frequency interval: 4MHz, ±3dB bandwidth).

(Carrier 900MHz, 1.8GHz, 2.4GHz, 6GHz)

200MHz (open loop of fixed amplitude, input 100mVrms sine wave through I channel, ±4dB bandwidth)

Number of channels: 2 (I and Q)

Maximum symbol rate:

Standard: 75Msps

Option 09: 125Msps

Baseband waveform memory:

Standard: 1G sampling point

Option H32: 2G sampling point

Real-time baseband mode:

Modulation format:

PSK: BPSK, QPSK, OQPSK, π/4DQPSK, D8PSK, 16PSK

QAM: 4, 16, 32, 64, 128, 256, 512, 1024

FSK: 2, 4, 8, 16

ASK, MSK, arbitrary wave modulation

EVM: <1.0% (typical value) (RMS%, symbol rate: 4Msps, root Nyquist filter, α=0.3, QPSK format)

Maximum frequency interval in dual tone mode: 200MHz

Arbitrary wave mode:

Data format: Mat-File 5, ASCII, Binary, cap, csv.

Trigger:

Trigger type: continuous, single, gating, advanced waveform segments;

Trigger source: trigger key, external, remote (GPIB, LAN);

Trigger mode: auto play, trigger play, trigger reset, single auto, single trigger buffer, single reset, gated (high, low), waveform segment-single, waveform segment-continuous;

Types: Pure noise, Continuous wave jamming, Additive noise

Noise bandwidth: 120/200MHz

Setting range: 0 to 40dB

N type (negative), impedance 50Ω

Width × height × depth: 330mm × 147mm × 397mm (excluding the handle)

420mm × 147mm × 445mm (including the handle)

<12kg (the weight varies with the model and option configuration)

100 – 120VAC, 50 – 60Hz; or 200 – 240VAC, 50 – 60Hz (self-adaptive)

Less than 300W

Operating temperature: 0°C-+50°C; storage temperature: -40°C-+70°C

(Note: see more detail information in the ‘Resource’ – ‘Datasheet’)