S3602 Series Vector Network Analyzer

S3602 series vector network analyzer is a top level VNA with excellent specifications. Its frequency ranges from 10MHz to 67GHz. With Saluki frequency extension modules, the VNA can reach up to 325GHz. S3602 series has a wide dynamic range, low trace noise, friendly UI and flexible interfaces including USB, GPIB, LAN and VGA.

Key Features

Frequency range from 10 MHz to 67 GHz

Extension modules can extend frequency range up to 325 GHz

Available in multiple display formats such as logarithmic amplitude, linear amplitude, SWR, Phase, Smith chart

Flexible and optional calibration types, Mechanic / Electronic calibration kit

64 measurement channels, 16 windows, 8 traces displayed on each window

Multi-window, multi-channel measurement, instantly execute intricate measurement plan

Record/run, one-click operation greatly simplifies the measurement setting steps and improves the efficiency

Available in functions as pulse S parameter measurement, time-domain measurement, mixer measurement, gain compression two-dimensional sweep measurement, millimeter-wave frequency extension, antenna & RCS measurement and receiving etc.

Frequency Range

S3602A: 10 MHz to 13.5 GHz,
S3602B: 10 MHz to 26.5 GHz,
S3602C: 10 MHz to 43.5 GHz,
S3602D: 10 MHz to 50 GHz,
S3602E: 10 MHz to 67 GHz

Frequency Resolution

1 Hz

Frequency Accuracy

±1×10-7 (23℃±3℃)

Max. Dynamic Range

•  S3602A/B: 135dB @10GHz

•  S3602C/D: 133dB @10GHz

•  S3602E: 125dB @10GHz

Power Scan Range

•  S3602A/B: 41dB @10GHz

•  S3602C/D: 36dB @10GHz

•  S3602E: 36dB @10GHz

Output Power

•  S3602A/B: 14dBm @10GHz

•  S3602C/D: 10dBm @10GHz

•  S3602E: 9dBm @10GHz

Amplitude Trace Noise

0.001dBrms @10GHz

Effective Directivity

•  S3602A/B: > 53dB

•  S3602C/D: > 42dB

•  S3602E: > 42dB

Effective Source Match
Effective Load Match

> 51dB

Reflection Tracking

•  S3602A/B: ± 0.01dB

•  S3602C/D: ± 0.02dB

•  S3602E: ± 0.02dB

Transmission Tracking

•  S3602A/B: ± 0.015dB

•  S3602C/D: ± 0.02dB

•  S3602E: ± 0.02dB

Number of Built-In Ports

2 ports (standard) / 4 ports (optional)

IF Bandwidth

1Hz – 5MHz

Impedance

50 Ω

Interface

•  S3602A/B: 3.5mm male

•  S3602C/D: 2.4mm male

•  S3602E: 1.85mm male

Dimension

•  S3602A/B: 463 (W) x 279.5 (H) x 640 (D) mm

•  S3602C/D: 463 (W) x 279.5 (H) x 690 (D) mm

•  S3602E: 463 (W) x 281 (H) x 690 (D) mm

Weight

•  S3602A/B: 42kg

•  S3602C/D: 47kg

•  S3602E: 50kg

(Note: see more detail information in the Source – Datasheet.)

Main Machine

Module No. Item Description
S3602A Vector Network Analyzer 10 MHz to 13.5 GHz
S3602B Vector Network Analyzer 10 MHz to 26.5 GHz
S3602C Vector Network Analyzer 10 MHz to 43.5 GHz
S3602D Vector Network Analyzer 10 MHz to 50 GHz
S3602E Vector Network Analyzer 10 MHz to 67 GHz

S3602A Options

Module No. Item Description
S3602A-201 2-Port Programmable Step Attenuator Set two 70dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
S3602A-400 4-Port Measurement Two-source stimulus configuration, four-port VNA configuration
S3602A-401 4-Port Programmable Step Attenuator Set four 70dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
S3602A-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400, S80 is needed)
S3602A-003 Vector Noise Figure Measurement The built-in 10MHz-13.5GHz high-sensitivity noise receiver requires external electronic calibration components. Using advanced source matching error and vector error correction calibration techniques, the industry's highest noise figure measurement accuracy can be obtained. This option contains "Scalar Noise Figure Measurement" functions.
S3602A-008 Pulse Measurement For pulse S-parameter measurement
S3602A-3648 Multi-port Network Parameter Expansion Device Extended to 16-port network parameter measurement (10MHz-13.5GHz)
S3602A-S05 S-parameter Signal Integrity Analysis Used to display the frequency domain characteristics and time domain TDR characteristics of the system. Built-in crosstalk evaluation modules such as NEXT, FEXT, PSXT, ILD, ICR and ICN. Built-in standards such as IEEE 802.3, PCIe, SAS and SATA help to quickly evaluate whether S parameters Meet the design requirements. Can automatically convert the software graphic curve into Word or PPT report. Support a variety of Dk/Df extraction methods. Support NRZ, PAM-4 eye diagram drawing function.
S3602A-S07 AFR Automatic Fixture Removal Option Used for automatic testing and removal of single-ended and balanced device measurement fixtures.
S3602A-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
S3602A-S11 Advanced Time Domain Analysis Used for TDR time domain impedance test, eye diagram analysis, etc.. S10 option is included in S11.
S3602A-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
S3602A-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400, S80 is needed)
S3602A-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400, S80 is needed)
S3602A-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83, S80 are needed)
S3602A-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
S3602A-S88 Phase Scan Option Used for phase scan measurement (need option S3602A-400).
31121 3.5mm Calibration Kit For calibration of the analyzer
SCAVNA26FM-(3.5/3.5) 3.5mm Test Cable For measurement of the analyzer, 3.5mm (female) to 3.5mm (male)
SCAVNA26FF-(3.5/3.5) 3.5mm Test Cable For measurement of the analyzer, 3.5mm (female) to 3.5mm (female)
20403 E-Cal Kit For calibration of the analyzer (10MHz-26.5GHz, 2 ports)
20405 E-Cal Kit For calibration of the analyzer (10MHz-20GHz, 4 ports)
S87232 USB Power Probe For 402, S82, S86 Options in the process of power calibration (50MHz-26.5GHZ)
Top Rack / Easy to build the system and use on the cabinet
S3602A-EWT1 Extend 1 year warranty /

S3602B Options

Module No. Item Description
S3602B-201 2-Port Programmable Step Attenuator Set two 70dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
S3602B-400 4-Port Measurement Two-source stimulus configuration, four-port VNA configuration
S3602B-401 4-Port Programmable Step Attenuator Set four 70dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
S3602B-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400, S80 is needed)
S3602B-003 Vector Noise Figure Measurement The built-in 10MHz-26.5GHz high-sensitivity noise receiver requires external electronic calibration components. Using advanced source matching error and vector error correction calibration techniques, the industry's highest noise figure measurement accuracy can be obtained. This option contains "Scalar Noise Figure Measurement" functions.
S3602B-008 Pulse Measurement For pulse S-parameter measurement
S3602B-480 Four-port Spread Spectrum System Cable Required connection cable for four-port vector network analyzer when directly building a spread spectrum system
S3602B-3648 Multi-port Network Parameter Expansion Device Extended to 16-port network parameter measurement (10MHz-26.5GHz)
S3602B-S05 S-parameter Signal Integrity Analysis Used to display the frequency domain characteristics and time domain TDR characteristics of the system. Built-in crosstalk evaluation modules such as NEXT, FEXT, PSXT, ILD, ICR and ICN. Built-in standards such as IEEE 802.3, PCIe, SAS and SATA help to quickly evaluate whether S parameters Meet the design requirements. Can automatically convert the software graphic curve into Word or PPT report. Support a variety of Dk/Df extraction methods. Support NRZ, PAM-4 eye diagram drawing function.
S3602B-S06 MiliMeter Extension Port Power Control Special for Saluki VNA. Suitable for extension modules with power adjustable function such as 3643P S-parameter extension module
S3602B-S07 AFR Automatic Fixture Removal Option Used for automatic testing and removal of single-ended and balanced device measurement fixtures
S3602B-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
S3602B-S11 Advanced Time Domain Analysis Used for TDR time domain impedance test, eye diagram analysis, etc.. S10 option is included in S11.
S3602B-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
S3602B-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400, S80 is needed)
S3602B-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400, S80 is needed)
S3602B-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83, S80 are needed)
S3602B-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
S3602B-S88 Phase Scan Option Used for phase scan measurement (need option S3602B-400).
31121 3.5mm Calibration Kit For calibration of the analyzer
SCAVNA26FM-(3.5/3.5) 3.5mm Test Cable For measurement of the analyzer, 3.5mm (female) to 3.5mm (male)
SCAVNA26FF-(3.5/3.5) 3.5mm Test Cable For measurement of the analyzer, 3.5mm (female) to 3.5mm (female)
20403 E-Cal Kit For calibration of the analyzer (10MHz-26.5GHz, 2 ports)
20405 E-Cal Kit 20405 E-Cal Kit For calibration of the analyzer (10MHz-20GHz, 4 ports)
S87232 USB Power Probe For 402, S82, S86 Options in the process of power calibration (50MHz-26.5GHz)
Top Rack / Easy to build the system and use on the cabinet
S3602B-EWT1 Extend 1 year warranty /

S3602C Options

Module No. Item Description
S3602C-201 2-Port Programmable Step Attenuator Set two 60dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
S3602C-400 4-Port Measurement Two-source stimulus configuration, four-port VNA configuration
S3602C-401 4-Port Programmable Step Attenuator Set four 60dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
S3602C-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400, S80 is needed)
S3602C-003 Noise Figure Measurement Frequency range: 10MHz to 43.5GHz; Measurement bandwidth: 800kHz to 24MHz; Noise figure + gain measurement range: 0 to +55dB; Noise source driving voltage: +28V±1V; Noise jitter: <0.15dB;
S3602C-008 Pulse Measurement For pulse S-parameter measurement
S3602C-480 Four-port Spread Spectrum System Cable Required connection cable for four-port vector network analyzer when directly building a spread spectrum system
S3602C-3648 Multi-port Network Parameter Expansion Device Extended to 16-port network parameter measurement (10MHz-43.5GHz)
S3602C-S05 S-parameter Signal Integrity Analysis Used to display the frequency domain characteristics and time domain TDR characteristics of the system. Built-in crosstalk evaluation modules such as NEXT, FEXT, PSXT, ILD, ICR and ICN. Built-in standards such as IEEE 802.3, PCIe, SAS and SATA help to quickly evaluate whether S parameters Meet the design requirements. Can automatically convert the software graphic curve into Word or PPT report. Support a variety of Dk/Df extraction methods. Support NRZ, PAM-4 eye diagram drawing function.
S3602C-S06 MiliMeter Extension Port Power Control Special for Saluki VNA. Suitable for extension modules with power adjustable function such as 3643P S-parameter extension module
S3602C-S07 AFR Automatic Fixture Removal Option Used for automatic testing and removal of single-ended and balanced device measurement fixtures
S3602C-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
S3602C-S11 Advanced Time Domain Analysis Used for TDR time domain impedance test, eye diagram analysis, etc.. S10 option is included in S11.
S3602C-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
S3602C-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400, S80 is needed)
S3602C-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400, S80 is needed)
S3602C-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83, S80 are needed)
S3602C-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
S3602C-S88 Phase Scan Option Used for phase scan measurement (need option S3602C-400).
31123 2.4mm Calibration Kit For calibration of the analyzer
SCAVNA50FM-(2.4/2.4) 2.4mm Test Cable For measurement of the analyzer, 2.4mm (female) to 2.4mm (male)
SCAVNA50FF-(2.4/2.4) 2.4mm Test Cable For measurement of the analyzer, 2.4mm (female) to 2.4mm (female)
20404 E-Cal Kit For calibration of the analyzer (10MHz-50GHz, 2 ports)
S87233 USB Power Probe For 402, S82, S86 options in the process of power calibration (50MHz-40GHz)
Top Rack / Easy to build the system and use on the cabinet
S3602C-EWT1 Extend 1 year warranty /

S3602D Options

Module No. Item Description
S3602D-201 2-Port Programmable Step Attenuator Set two 60dB programmable step attenuators for the source path, and two 35dB programmable step attenuators for the receiver path
S3602D-400 4-Port Measurement Two-source stimulus configuration, four-port VNA configuration
S3602D-401 4-Port Programmable Step Attenuator Set four 60dB programmable step attenuators for the source path, and four 35dB programmable step attenuators for the receiver path (Option 400 is needed)
S3602D-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400 is needed)
S3602D-003 Noise Figure Measurement Frequency range: 10MHz to 50GHz; Measurement bandwidth: 800kHz to 24MHz; Noise figure + gain measurement range: 0 to +55dB; Noise source driving voltage: +28V±1V; Noise jitter: <0.15dB;
S3602D-008 Pulse Measurement For pulse S-parameter measurement
S3602D-480 Four-port Spread Spectrum System Cable Required connection cable for four-port vector network analyzer when directly building a spread spectrum system
S3602D-3648 Multi-port Network Parameter Expansion Device Extended to 16-port network parameter measurement (10MHz-50GHz). This device is 12 ports.
S3602D-S05 S-parameter Signal Integrity Analysis Used to display the frequency domain characteristics and time domain TDR characteristics of the system. Built-in crosstalk evaluation modules such as NEXT, FEXT, PSXT, ILD, ICR and ICN. Built-in standards such as IEEE 802.3, PCIe, SAS and SATA help to quickly evaluate whether S parameters Meet the design requirements. Can automatically convert the software graphic curve into Word or PPT report. Support a variety of Dk/Df extraction methods. Support NRZ, PAM-4 eye diagram drawing function.
S3602D-S06 MiliMeter Extension Port Power Control Special for Saluki VNA. Suitable for extension modules with power adjustable function such as 3643P S-parameter extension module
S3602D-S07 AFR Automatic Fixture Removal Option Used for automatic testing and removal of single-ended and balanced device measurement fixtures
S3602D-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
S3602D-S11 Advanced Time Domain Analysis Used for TDR time domain impedance test, eye diagram analysis, etc.. S10 option is included in S11.
S3602D-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
S3602D-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400, S80 is needed)
S3602D-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400, S80 is needed)
S3602D-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83, S80 are needed)
S3602D-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
S3602D-S88 Phase Scan Option Used for phase scan measurement (need option S3602D-400).
31123A 2.4mm Calibration Kit For calibration of the analyzer
SCAVNA50FM-(2.4/2.4) 2.4mm Test Cable For measurement of the analyzer, 2.4mm (female) to 2.4mm (male)
SCAVNA50FF-(2.4/2.4) 2.4mm Test Cable For measurement of the analyzer, 2.4mm (female) to 2.4mm (female)
20404 E-Cal Kit For calibration of the analyzer (10MHz-50GHz, 2 ports)
Top Rack / Easy to build the system and use on the cabinet
S3602D-EWT1 Extend 1 year warranty /

S3602E Options

Module No. Item Description
S3602E-201 2-Port Programmable Step Attenuator Set two 50dB programmable step attenuators for the source path, and two 50dB programmable step attenuators for the receiver path
S3602E-400 4-Port Measurement Two-source stimulus configuration, four-port VNA configuration
S3602E-401 4-Port Programmable Step Attenuator Set four 50dB programmable step attenuators for the source path, and four 50dB programmable step attenuators for the receiver path (Option 400 is needed)
S3602E-402 Active Inter-modulation Measurement For inter-modulation signal measurement of amplifier (Option 400, S80 is needed)
S3602E-008 Pulse Measurement For pulse S-parameter measurement
S3602E-480 Four-port Spread Spectrum System Cable Required connection cable for four-port vector network analyzer when directly building a spread spectrum system
S3602E-S05 S-parameter Signal Integrity Analysis Used to display the frequency domain characteristics and time domain TDR characteristics of the system. Built-in crosstalk evaluation modules such as NEXT, FEXT, PSXT, ILD, ICR and ICN. Built-in standards such as IEEE 802.3, PCIe, SAS and SATA help to quickly evaluate whether S parameters Meet the design requirements. Can automatically convert the software graphic curve into Word or PPT report. Support a variety of Dk/Df extraction methods. Support NRZ, PAM-4 eye diagram drawing function.
S3602E-S06 MiliMeter Extension Port Power Control Special for Saluki VNA. Suitable for extension modules with power adjustable function such as 3643P S-parameter extension module
S3602E-S07 AFR Automatic Fixture Removal Option Used for automatic testing and removal of single-ended and balanced device measurement fixtures
S3602E-S10 Time Domain Measurement For time-domain test, can locate and analyze the discontinuous positions in devices, fixtures or cables.
S3602E-S11 Advanced Time Domain Analysis Used for TDR time domain impedance test, eye diagram analysis, etc.. S10 option is included in S11.
S3602E-S80 Frequency Offset Measurement For frequency offset measurement. millimeter-wave frequency extension main unit needs this option
S3602E-S82 Mixer Scalar Measurement For the scalar parameter measurement of mixers (Option 400, S80 is needed)
S3602E-S83 Mixer Vector Measurement For the vector parameter measurement of mixers (Option 400, S80 is needed)
S3602E-S84 Embedded LO Frequency Converter Measurement For the measurement of embedded LO frequency converters (Option 400, S82 or S83, S80 are needed)
S3602E-S86 Gain Compression Two-Dimension Sweep Measurement For the gain compression two-dimension sweep test of amplifier
S3602E-S88 Phase Scan Option Used for phase scan measurement (need option S3602E-400).
S3602E-3648 Link Expansion Device Frequency range: 10MHz-67GHz; Number of ports: 12; Communication interface: USB
31128 1.85mm Calibration Kit For calibration of the analyzer
SCAVNA67FM-(1.85/1.85) 1.85mm Test Cable For measurement of the analyzer, 1.85mm (female) to 1.85mm (male)
SCAVNA67FF-(1.85/1.85) 1.85mm Test Cable For measurement of the analyzer, 1.85mm (female) to 1.85mm (female)
Top Rack / Easy to build the system and use on the cabinet
S3602E-061 Extension Workbench /
S3602E-EWT1 Extend 1 year warranty For S3602E main machine
S3602E-3648-EWT1 Extend 1 year warranty For S3602E-3648 link expansion device